|
|
09-16-2013, 10:25 AM
|
#1
|
Senior Member
Join Date: Sep 2010
Location: Kelowna, British Columbia
Trailer: 2008 Escape 17b
Posts: 1,868
|
Removable power cord.
Has anyone noticed any stress surrounding the exterior plug in on the removable power cord option?
|
|
|
09-16-2013, 12:39 PM
|
#2
|
Senior Member
Join Date: Aug 2011
Location: St. Paul, Minnesota
Trailer: 2014 Escape 21 -- The Skylark. Towed by a 2014 Highlander
Posts: 1,159
|
I have noticed some in mine -- a very small gap between the exterior insulation and the yellow plug that locks into the trailer fitting. It is mysterious to me, because I am sure that I have never pulled on the cord to get the plug out. I am contemplating buying a replacement cord, but so far I haven't found one with a locking plug for the trailer. The other option is some liquid electrical tape liberally applied around the plug.
|
|
|
09-16-2013, 01:52 PM
|
#3
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Are you saying stress around the fiberglass where the plug is installed or stress on the cord itself? Any pictures?
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
09-16-2013, 02:15 PM
|
#4
|
Senior Member
Join Date: Aug 2011
Location: St. Paul, Minnesota
Trailer: 2014 Escape 21 -- The Skylark. Towed by a 2014 Highlander
Posts: 1,159
|
Jim, I am talking about the cord itself. Specifically the junction of the black cord and the yellow plug on the end of the cord. Will send photos when I next visit the trailer, but that is probably a week away. I wish I had a parking spot for the trailer at our home, but one of the downsides of city life is a limited amount of parking.
Leon (often in doubt, often wrong)
|
|
|
09-16-2013, 02:18 PM
|
#5
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Ok, Leon, the stress point in the cord, gotcha,
I like your signature saying.....
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
09-16-2013, 06:49 PM
|
#6
|
Member
Join Date: May 2013
Posts: 579
|
Hey,
I believe he is referring to this ...
It just means the sheathing as gotten worn. Simple matter to open up the plug and redo the connections moving about an inch or so back up the wire. I just have not gotten around to it yet :}
Cypher
|
|
|
09-16-2013, 07:21 PM
|
#8
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,567
|
You could take the connector apart, and shorten the wires by 1/2" or so too. I do like the idea of the 90° adapter too.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
09-16-2013, 10:32 PM
|
#9
|
Member
Join Date: May 2013
Posts: 579
|
|
|
|
09-17-2013, 12:05 AM
|
#10
|
Senior Member
Join Date: Mar 2013
Location: Battle Ground, Washington
Trailer: 2001 Bigfoot 21RB/ 73Boler/Trillium 5500
Posts: 178
|
I wrapped the cord to the yellow cap with black tape which seals the moisture out.
Chuck
|
|
|
09-17-2013, 08:18 AM
|
#11
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Quote:
Originally Posted by Cypherian
|
That looks like it, better price too.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
09-18-2013, 03:41 PM
|
#12
|
Senior Member
Join Date: Aug 2011
Location: St. Paul, Minnesota
Trailer: 2014 Escape 21 -- The Skylark. Towed by a 2014 Highlander
Posts: 1,159
|
I went RV Power Cords | RV Shore Cords | RV Power Extension Cords | RV Adapter Dogbones here, and got a whole new power cord. $27.00 more than the right angle adaptor. The nice thing is that it is 5 feet longer. We stayed at a camp ground in Gloucester, MA, and the electrical hook ups were a long ways away.
It came today and is much heavier than the original power cord. Not sure why.
|
|
|
09-18-2013, 03:47 PM
|
#13
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
I've always had good luck with Makarios RV supply, good prices. Also Eastern Marine sells tires on wheels already mounted, real cheap.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
11-10-2013, 06:30 PM
|
#14
|
Senior Member
Join Date: Oct 2012
Location: Highland Park, New Jersey
Trailer: Escape 19 February 2014
Posts: 975
|
We are getting close to having to commit to the build sheet and I'm going round and round with the removable power cord. We had decided not to order this -- so one last time -- Is it tricky and/or time consuming to replace the non-removable power cord when leaving camp? I'm not concerned about bugs and dirt but if it's awkward to replace it I'd rethink this option.
|
|
|
11-10-2013, 06:55 PM
|
#15
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,073
|
Ruthe, I've never found the non-removable power cord to be a problem in my Scamp. It's never hung up and I like the fact I only need to pull out enough to reach the power bush. Nothing laying on the ground to get muddy. I have (often) tied a plastic bag to it, so no one walks between the trailer and power bush and trips! I figure it's one less thing for me to leave behind.... YMMV
|
|
|
11-10-2013, 07:05 PM
|
#16
|
Senior Member
Join Date: Feb 2013
Location: Marana, Arizona
Trailer: 2018 Airstream Flying Cloud (Escape 19 & 5.0 previously)
Posts: 1,078
|
Possibly the easiest part of breaking camp. Really.
|
|
|
11-10-2013, 07:21 PM
|
#17
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
If you camp below freezing, the cord will be very stiff and uncooperative, I end up just throwing my removable one into the truck bed. It is too hard to try to wind up, let alone feed thru a hole.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
11-10-2013, 07:51 PM
|
#18
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
I tried to move a larger (50-amp 4-conductor) RV power cable once in mid-winter and it cracked the outer cover right through, even though I wasn't forcing it in a tight bend at all. RV power cables are not expected to be used in the cold, and flexibility can be an issue...
|
|
|
11-10-2013, 08:25 PM
|
#19
|
Senior Member
Join Date: Jul 2013
Location: Auburn, California
Trailer: 2012 17B
Posts: 120
|
I commented in another post the removable power cord is a great idea. In bad weather or hurry up situations you can just take it off and stow it. In previous MHs, there were innumerable times I'd skin my knuckles reinserting the permanent one in its hole. Frankly it's not that expensive and doesn't hurt to have it even if you don't think it is necessary.
|
|
|
11-10-2013, 09:24 PM
|
#20
|
Member
Join Date: May 2013
Posts: 579
|
Hey,
A nice feature of the removable one you can swap it out if the plug breaks or wire etc fairly simply get another. With a permenant mount slide in style you would have to repair it there if you have tools and parts or take the trailer someplace. Just my thoughts:}}
Cypher
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|