21C height of bottom of bumper

[bborzell]

Wondering about the height of the lowest part of the rear bumper.

We have a dip at the bottom of our driveway that our Class C motorhome barely cleared. Eyeballing the distance between the rear axle on the MH and the height of the rear bumper leads me to believe that the 21C should have no problem with the dip, but it would be good to know the height of the bottom of the bumper on a 21C without the lift kit.

The lift kit would make the trailer 5/8” too tall to go under our breezeway between the house/garage.

Thanks in advance.

[rubicon327]

Your limiting factor will be the 2” receiver that is standard. Sorry but I don’t have the measurement.

[Ron in BC]

16 1/2". The distance from the center of the rear axle to the rear of the receiver is approx. 7'-2". This may also be a factor.

Ron

[bborzell]

Originally Posted by Ron in BC

16 1/2". The distance from the center of the rear axle to the rear of the receiver is approx. 7'-2". This may also be a factor.

Ron

Exactly what I needed. Thanks.