|
07-09-2018, 04:28 PM
|
#1
|
Senior Member
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 2,255
|
teak table
wondering if anyone is using that pretty teak boating fold up table with the pedestal table support? can it be lowered to use as a bed?
|
|
|
07-09-2018, 04:50 PM
|
#2
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Quote:
Originally Posted by Fox hunt
wondering if anyone is using that pretty teak boating fold up table with the pedestal table support? can it be lowered to use as a bed?
|
which one, do you have a link?
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
07-09-2018, 04:53 PM
|
#3
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
is this the one?
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
07-09-2018, 06:30 PM
|
#4
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Quote:
Originally Posted by Fox hunt
wondering if anyone is using that pretty teak boating fold up table with the pedestal table support? can it be lowered to use as a bed?
|
Yes. I just installed it last week. It will lower enough and could possibly be used for the bed. I plan on keeping the old table without the hardware and just put it in place over the lowered teak table when needed.
|
|
|
07-09-2018, 06:32 PM
|
#5
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Quote:
Originally Posted by JStelly
Yes. I just installed it last week. It will lower enough and could possibly be used for the bed. I plan on keeping the old table without the hardware and just put it in place over the lowered teak table when needed.
|
Look under the Lagun table mod thread. I posted pics there. http://www.escapeforum.org/forums/f8...tml#post251003
|
|
|
07-09-2018, 09:24 PM
|
#6
|
Site Team
Join Date: Jun 2014
Location: Canyon Lake, Texas
Trailer: 2015 19 "Past Tents", 2021 F150 Lariat 2.7L EB
Posts: 10,222
|
Quote:
Originally Posted by Fox hunt
Can it be lowered to use as a bed?
|
I would not try it because it won't be the exact width to fit in the rails on the benches. But, that's not really a big issue. Just keep the stock table under the bed and use it whenever you need to convert to a bed. The Lagun removes easily.
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
07-10-2018, 07:18 AM
|
#7
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Quote:
Originally Posted by rbryan4
I would not try it because it won't be the exact width to fit in the rails on the benches. But, that's not really a big issue. Just keep the stock table under the bed and use it whenever you need to convert to a bed. The Lagun removes easily.
|
Agree. There is about a 2 inch gap on each side since the teak table is a bit narrower.
|
|
|
07-10-2018, 07:19 AM
|
#8
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
Quote:
Originally Posted by JStelly
|
Thanks Donna!
|
|
|
07-10-2018, 07:22 AM
|
#9
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,051
|
Quote:
Originally Posted by JStelly
Thanks Donna!
|
Glad to help
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
07-10-2018, 08:16 AM
|
#10
|
Senior Member
Join Date: Apr 2017
Location: DFW, Texas
Trailer: 2018 21 Sept 7 2018
Posts: 1,073
|
Where did you order this top
|
|
|
07-10-2018, 08:55 AM
|
#11
|
Senior Member
Join Date: Feb 2010
Location: Oswego, New York
Trailer: 2017 Escape 21C, 2018 Ford F150
Posts: 5,373
|
There are a couple different versions & many different sizes of the Teak tables available from Marine Teak, a UK company where I bought mine, along with the Lagun table mount. Fast and inexpensive shipping, however if you do a Google search, there are some US suppliers.
I purchased the sliding version ( Nautic Star Slide), and discovered that I had to add a 1/2" spacer between the table & the Lagun mount so the slide supports cleared the Lagun arm. Not a major problem, but if you want it to spin through 360°, necessary. If I was doing it again, I might switch to the folding table rather than the slide.
I made some spacer boards from 1"X8"s to use to make up the bed & store them under the rear dinette seat.
Some photos of the table & Lagun installation on my Escape 21 modifications page.
|
|
|
07-10-2018, 03:29 PM
|
#12
|
Senior Member
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 2,255
|
OK interesting it was the pictured one i was thinking of. I'm just trying to find away to have a smaller table (easier to get into the space) but still convert it easily to a bed i have the springfield pedestal.
|
|
|
07-10-2018, 06:18 PM
|
#13
|
Senior Member
Join Date: Sep 2011
Location: Olympia, Washington
Trailer: 2016 Escape 5.0TA has gone to a good home in Manitoba. Now Class B+ owners sadly not an Escape
Posts: 460
|
When we had our 5.0TA I was toying with the idea of removing our regular size table and replacing it with an 18" round table. We had the Springfield pedestal which would actually go down low enough that the top of the round table would be lower than the supports for the regular table. So when we wanted to use the bed we would simply have lowered the Springfield and laid the original oblong tabletop over it for a bed. In theory it looked like that would work!
__________________
Jan and Paul
"Le Bon Oeuf"
|
|
|
07-11-2018, 06:08 AM
|
#14
|
Senior Member
Join Date: Apr 2017
Location: DFW, Texas
Trailer: 2018 21 Sept 7 2018
Posts: 1,073
|
Ty for the info
|
|
|
08-08-2018, 07:54 AM
|
#15
|
Senior Member
Join Date: Feb 2010
Location: Oswego, New York
Trailer: 2017 Escape 21C, 2018 Ford F150
Posts: 5,373
|
Just a heads up for those deciding to finish a teak table from MarineTeak. I used three coats of clear polyurethane (oil based), with light sanding between each coat. The finish dried as expected on the wood, but the rubberized inlay strips (designed, I suspect, to prevent stuff from sliding with the waves) did not dry, even after a month. Very annoying in that paper, napkins, etc sticks to the strips, leaving fuzz. I'm open to suggestions for a cure. No idea if using a linseed oil finish would have the same result.
|
|
|
08-08-2018, 09:39 AM
|
#16
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Probably mot, the rubber is more impervious than the wood. Try some wd-40 on a rag to clean the rubber of the polish and then try some 303 or Armor All on the rubber only.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
08-08-2018, 10:05 AM
|
#17
|
Senior Member
Join Date: Jun 2013
Location: Friendswood, Texas
Trailer: 2015 Escape 19' (sold), Escape 5.0 as of August 2019 (sold)
Posts: 664
|
I used the Semco sealer recommended by Marine Teak. I applied two coats and it worked well. It didn’t adhere to the rubber seams. I bought it via Amazon. It can’t be purchased and shipped from the U.K.
|
|
|
08-08-2018, 11:42 AM
|
#18
|
Senior Member
Join Date: Jan 2014
Location: North Van., British Columbia
Trailer: 2014 Escape 19, sold; 2019 Escape 21, Sept. 2019
Posts: 8,813
|
Quote:
Originally Posted by Vermilye
but the rubberized inlay strips (designed, I suspect, to prevent stuff from sliding with the waves)
|
You might be right about that because it's not the traditional use for those inlay stips. They are mimicking a traditional teak deck with polysulfide caulking.
The tradition for interior teak strips is to use holly strips between them like this, a teak and holly sole.
My teak finishing over the years has ranged from traditional yacht varnish to all the different oil finishes and epoxy. My go-to finish for interior use is now water based Varathane. I'd never go back to the other finishes.
Ron
|
|
|
08-08-2018, 12:40 PM
|
#19
|
Senior Member
Join Date: May 2013
Location: ..., New Mexico
Trailer: 2013 Esc19/'14 Silvrado
Posts: 4,193
|
Wow, I want my next Escape to look like that. Re: interior wood finishes -- always been partial to Deft lacquer.
__________________
Myron
"A billion here, a billion there...add it all up and before you know it you're talking real money." Everett Dirkson
|
|
|
08-08-2018, 03:15 PM
|
#20
|
Senior Member
Join Date: Apr 2014
Location: Olympia wa, Washington
Trailer: 5.0TA 2017
Posts: 2,255
|
beautiful my step fathers sail boat has a floor like that he did it himself difficult to do all the cuts on the curved sides!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|