Faucet installation causes leak
This took a while to occur, but our 2019 21 started leaking water under the sink. Fortunately, we were in the trailer at home when it happened. It could have been much worse if on the road.
After investigation I determined the leak was in the hot water copper tubing that connects to the PEX fitting. It looks like during installation they pushed to tubing to the back to make the connection. This put a kink in the tubing and had it rubbing against the large threaded fitting that holds the faucet down. Over time, the vibration and wear caused a pinhole leak.
The picture is worse than it was because I had to bend the tubing to remove it. This broke the tubing open. You can also see the kink and wear in the cold water line. It wasn't leaking, but it was only a matter of time.
You might check your connections. Inserting some plastic might ease the friction and wear.
Off to get a new faucet. Any recommendations?
__________________
Bob & Katie Brandenstein
On the road in our Escape 21
|