Wiring solar and inverter Escape 19

[ChuckBC]

My trailer is prewired for A/C from rear vent to front panel. It is unfortunate the wire isn't suitable for my solar install!

[NEWYORKHILLBILLY]

Chuck
I was told they no longer bolt the panels down. they tell me there is wood blocks molded in that the brackets then screw to. I was thinking of getting the pre wire solar and i asked about this.I was also told to contact service for the location of the wood blocks.

[ChuckBC]

Originally Posted by NEWYORKHILLBILLY

Chuck
I was told they no longer bolt the panels down. they tell me there is wood blocks molded in that the brackets then screw to. I was thinking of getting the pre wire solar and i asked about this.I was also told to contact service for the location of the wood blocks.

I will need to phone Dave at ETI and see where blocks are. Are you phoning to enquire?

You noted that " they no longer bolt panels down". If mounting rigid panels how are they fastening to roof?

[NEWYORKHILLBILLY]

Originally Posted by ChuckBC

I will need to phone Dave at ETI and see where blocks are. Are you phoning to enquire?

You noted that " they no longer bolt panels down". If mounting rigid panels how are they fastening to roof?

No i been talking by email. I still haven't decided weather i going to get solar ready or go ahead and have them install it. but if you get locations please post for others.

[cpaharley2008]

Mine are bolted down, in the rear over the dinette

[Eggscape]

Originally Posted by cpaharley2008

Mine are bolted down, in the rear over the dinette

Do you see the bolts on the inside of the trailer?