I did a headboard mod after MaryF posted she had done it. See Post 16.
https://www.escapeforum.org/forums/f...ning-6382.html
Am going to try a different way of remounting the L brackets to the plywood bed surface as it is a PITA to remove headboard otherwise. I needed to do it to replace the trailer umbilical cord and where the junction box is wasn't accessible enough for me so I pulled up the half of the plywood bed surface closest to the bathroom.
Doing it over I will mount the nylock nuts before replacing the pllywood and probably leave the nuts off most, if not all the third L bracket closest to the driver's side. I first undid just those nut, however the headboard covered up the one wood screw at the head of the plywood so I won't be reinstalling that one either.
I'll post some pictures to better show how this was done; MaryF was kind enough to answer about 3-4 PM's back in 2015. It was a fun and relatively simple mod.