Photo mock-up and floorplan for new 5.0 - Page 14 - Escape Trailer Owners Community

Go Back   Escape Trailer Owners Community > Escape Community > Escape News
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 11-11-2013, 07:12 PM   #131
Senior Member
 
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 9,052
Quote:
Originally Posted by Jim Bennett View Post
My bet is that most people could care less about this, and trust that whatever Escape does will be fine.
I think a lot of people choose a product based on experience with the brand, and the expectation that the product will follow that brand's typical practice. As this is the first leaf-spring Escape, there's a lack of typical practice for reference. I expect that what Escape does will be appropriate; I don't know what that will be.

It is also early enough in the new 5.0 production that the inclusion of shocks may still be to be determined; Reace may appreciate hearing the thoughts of potential owners... those who have an opinion.

I agree that most people will not have an opinion, just as many wouldn't have had an opinion about many of the other aspects of the design discussed in this thread, such as the tandem axles (instead of single).

Quote:
Originally Posted by Jim Bennett View Post
I know I never once concerned myself with any frame, shell, suspension, or tire thoughts. I just made sure I got most of the options I wanted, if possible.
Many discussions in this forum are about the frame, how the shell is insulated or even constructed, what the load ratings of the suspensions are, and what size of tires are supplied and what size fits (especially the tires). Not everyone cares about those things, but surely they are legitimate topics of discussion for those who are interested, right?

Also, if shocks are an option wouldn't they be as valid a topic of discussion as any other option? Why ignore shocks but choose the size of the battery and the level of insulation? You don't choose the size of the battery or the insulation in your car... you trust the manufacturer.

Quote:
Originally Posted by Jim Bennett View Post
We can over evaluate things, which only leads to unwarranted concerns, and stress.
I'm not sure what this forum is for, if it is too stressful to think. We should all just buy the stock version, right?
__________________

Brian B-P is offline   Reply With Quote
Old 11-11-2013, 07:21 PM   #132
Senior Member
 
thoer's Avatar
 
Join Date: Oct 2009
Location: Galesville, Wisconsin
Trailer: 2017 21 "Blue II" & 2017 Highlander XLE (previously 2010 17B "Blue" & 2008 Tacoma)
Posts: 3,961
Quote:
Originally Posted by Jim Bennett View Post
We can over evaluate things, which only leads to unwarranted concerns, and stress.
...to unwarranted concerns, and stress for Reace to deal with. I think he would be relieved to get a large batch of "stock version" orders!
__________________

__________________
Eric (and Mary who is in no way responsible for anything stupid I post)

SAE Towing Standard "Beware of false knowledge; it is more dangerous than ignorance." George Bernard Shaw
thoer is offline   Reply With Quote
Old 11-11-2013, 07:51 PM   #133
Senior Member
 
float5's Avatar
 
Join Date: Nov 2010
Location: Denison, Texas
Trailer: 2015 21'; 2011 19' sold; 4Runner; ph ninezero3 327-27ninefour
Posts: 4,900
I expect that they mostly do get stock version orders with very little change. But at an Escape rally, people can see quite a few versions that make Escapes of greater interest. It isn't necessarily "seen one, seen them all" as with other fiberglass trailers presently being made.
__________________
Cathy. Floating Cloud
"Live in the sunshine, swim the sea, drink the wild air.... "
Emerson
float5 is offline   Reply With Quote
Old 11-11-2013, 07:58 PM   #134
Senior Member
 
Jim Bennett's Avatar
 
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 11,934
Quote:
Originally Posted by thoer View Post
...to unwarranted concerns, and stress for Reace to deal with. I think he would be relieved to get a large batch of "stock version" orders!
Yeah, it sure would be easier. This customizing is something I have chatted with him about before, as it is not a lot different from what I do for a living, custom renovations. People like to be given some options, as it makes it feel more unique to them, something they were part of the design on. I think allowing some options is a good part of their success.

It would be great if I could just do cookie cutter renos, and not give customers choices, but I would not get much business.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
Jim Bennett is offline   Reply With Quote
Old 11-11-2013, 08:24 PM   #135
Senior Member
 
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 9,052
Just for the record, I was not suggesting any kind of customization. My question - which I am surprised to find seems to have been unwelcome - was simply about the base and optional configuration of stock equipment for the new 5.0 model.
Brian B-P is offline   Reply With Quote
Old 11-11-2013, 08:32 PM   #136
Site Team
 
cpaharley2008's Avatar
 
Join Date: Jun 2010
Location: York, Pennsylvania
Trailer: 2016 2ndGen Escape 19' PRAIRIE SCHOONER pulled by 2014 Ram Hemi/8sp
Posts: 13,669
Brian,
I'm sure your perspective is certainly welcome, nothing should be voiced to hamper the freedom of expressing your opinion,
__________________
Jim
The two most important days in your life are the day you were born and the day you find out why………..Mark Twain
cpaharley2008 is offline   Reply With Quote
Old 11-11-2013, 11:13 PM   #137
Senior Member
 
Join Date: Sep 2011
Location: Burlington, Ontario
Trailer: 2012 Escape 19
Posts: 193
Quote:
Originally Posted by Jim Bennett View Post
My bet is that most people could care less about this, and trust that whatever Escape does will be fine. I know I never once concerned myself with any frame, shell, suspension, or tire thoughts. I just made sure I got most of the options I wanted, if possible.

We can over evaluate things, which only leads to unwarranted concerns, and stress.
Wise words Jim.

Towed vehicle type = fifth wheel. Dramatically different mechanical design vs conventional towed trailers for static and dynamic considerations for the body on frame vehicle.

I don't know of an Airstream version. Most/all fifth wheel units I've see (except the current escape) are tandem/triple axles c/w leaf springs (no shocks).

Designing a close coupled independently sprung tandem axle for optimal dynamic behavior is probably beyond the scope of our little forum and that's a good thing in the opinion of this mechanical engineer
__________________
Robert
Burloak is offline   Reply With Quote
Old 11-12-2013, 12:37 AM   #138
Senior Member
 
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 9,052
Quote:
Originally Posted by Burloak View Post
Towed vehicle type = fifth wheel. Dramatically different mechanical design vs conventional towed trailers for static and dynamic considerations for the body on frame vehicle.
A fifth-wheel trailer is still a trailer, with a pin-and-plate style hitch mounted roughly over the towing truck's axle. Now that these hitches articulate in all axes, the hitch is irrelevant to towing characteristics; indeed, many people convert them to ball hitches and the Escape 5.0's closest competition (the Scamp 19') comes from factory with coupler for a ball - the same style and even size (2") as used on their other trailers. The location of the hitch is more stable than the "tag" or "bumper pull" position, leading to more stable towing... but that's irrelevant to the suspension. The tow vehicle can typically handle much more hitch weight over the axle than behind it, allowing a higher hitch weight proportion and again typically greater stability, but that can be done with any trailer if the tug can handle the hitch weight... and again it is irrelevant to the trailer suspension.

Since it is just a trailer, the mechanical design - which means the suspension hubs/bearings and brakes because those and the coupler are the only mechanical components of the vehicle - are typical trailer parts, in the Escape 5.0 just as in any other brand. The original 5.0 uses the same axle as every other Escape (Dexter's Torflex #10). If one includes frame structure in mechanical design then yes, the tongue is obviously a different shape... still not relevant to the suspension.

When the trailer goes over a bump, the suspension doesn't know or care what's holding up the front end of the trailer.

Yes, the Escape 5.0 is a body-on-frame vehicle, and so are almost all recreational trailers including all of the other Escape models. I must have missed something: how is this relevant to the use of shocks?

Quote:
Originally Posted by Burloak View Post
I don't know of an Airstream version.
I don't know of any fifth-wheel Airstream, either, nor can I see how that is relevant to the Escape 5.0.

Quote:
Originally Posted by Burloak View Post
Most/all fifth wheel units I've see (except the current escape) are tandem/triple axles c/w leaf springs (no shocks).
Yes, most 5th wheel RVs are tandems, because their axle weight is in the range for which tandems are conventionally used... just like the larger current Escapes, and just like non-5th-wheel trailers of the same weight. There have been smaller models by various manufacturers (including the current Escape 5.0) which are in the single-axle weight range, and so use a single axle. It has become common for the very heavy "toybox" 5th wheels (35 to 42 feet long and up to 10 tons loaded) to use three axles to handle their weight... and the biggest non-5th-wheel toyboxes are triples as well. Just like most non-5th-wheel trailers, most of these units use leaf springs and beam axles.

It is particularly popular to use "equalized" leaf spring suspensions in tandem and triple sets, because systems like the Torflex don't distribute load between themselves. Perhaps that's one reason for Reace to choose them for the new 5.0, but the load-sharing issue is the same whether or not the trailer is a 5th wheel.

My 34' conventional (stick-built) 5th wheel has tandem beam axles on leaf springs... and shocks. The shocks (which appear to be the common Dexter items) were stock equipment, as is common on better trailers, even if you haven't noticed this.

Quote:
Originally Posted by Burloak View Post
Designing a close coupled independently sprung tandem axle for optimal dynamic behavior is probably beyond the scope of our little forum and that's a good thing in the opinion of this mechanical engineer
I assume that the 5.0 will used an equalized set of leaf suspensions, not independent of each other, but regardless I'm not suggesting that we jointly design anything. Indeed...
the question was simply whether or not the new 5.0 would have shocks, as are commonly found on premium RV trailers with leaf springs - why is that so offensive to some of you?
Brian B-P is offline   Reply With Quote
Old 11-12-2013, 01:07 AM   #139
Senior Member
 
escape artist's Avatar
 
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA
Posts: 5,287
Hi: All... WHOA!!! This is getting quite "Shocking". I don't think it was Reace's intention to re invent the wheel. Only to build a newer, more adjustable 5.0. I'm certain he has thought of some form of damping for the new axles, and will use whatever his supplier suggests is appropriate!!! Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'10 Frontier CC. S.E. 4X4 Lng. Bed V6 '14 Escape 5.0TA
St.Thomas Ont.( Not the Virgin Islands)
escape artist is offline   Reply With Quote
Old 11-12-2013, 03:08 AM   #140
Senior Member
 
Join Date: Sep 2011
Location: Burlington, Ontario
Trailer: 2012 Escape 19
Posts: 193
In my professional opinion the damping requirements of a particular suspension system design has everything to do with its design characteristics and expected loading and very little to do with whatever "premium" means in trailer marketing.

Fifth wheels have lower sprung weight vs a conventional trailer of the same mass. That in turn lowers the spring rates required to carry the remaining towed mass. Close coupled axles don't react simultaneously but rather in sequence and symbiotically to road input. We don't anything about the designers assumptions regarding input amplitude and frequency. I've said before that if you only travel smooth roads you don't even need the springs.

I'm sure if the chassis engineer determines the suspension system needs shocks it will get them, if it doesn't it won't be changing my mind regarding the quality of the escape product.
__________________

__________________
Robert
Burloak is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






» Virginia Campgrounds

Reviews provided by



All times are GMT -5. The time now is 07:52 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 Social Knowledge, LLC All Rights Reserved.