Towing 19 with toyota tacoma will I need WDH systems

[NEWYORKHILLBILLY]

Originally Posted by cpaharley2008

If you are picking up, but one and take with you, very easy to install with a coupe of wrenches. That way you will have it. Measure your tailgate length and install you stinger and measure that. The jack is maybe 4"-6" behind the ball. I can measure tomorrow for exact, if needed.

maybe I will take you up on that offer to measure. I just measured the casita and its 8 3/4" from front of jack to center of ball and 10 1/2" from front of jack to longest point of ball mount flange.


Hey as long as you out there can you measure the door opening clearance at its narrowest point ?

[cpaharley2008]

Hey as long as you out there can you measure the door opening clearance at its narrowest point

Not sure what you want here? Clearance to ground?

[cpaharley2008]

The distance is 10" center of jack to center of ball, but the jack handle is 4" to center of ball...

[NEWYORKHILLBILLY]

Originally Posted by cpaharley2008

Hey as long as you out there can you measure the door opening clearance at its narrowest point

Not sure what you want here? Clearance to ground?

on the entry door just the clearance width. so how wide of object will pass thre the door. I have a dog kennel thats 21 5/8" wide and i wondering if it will fit.

Originally Posted by cpaharley2008

The distance is 10" center of jack to center of ball, but the jack handle is 4" to center of ball...

hmm i dint think of handle that might be a problem, so the center of ball to the front of jack would be?


Thanks again for doing this!!

[mtnest]

Our Tacoma tailgate does not hit the power jack on our 2017 E19. We tow with a 2016 TRD Off Road double cab (with a shell) and Fastway E2 WDH. -Tom

[cpaharley2008]

Some people have adapted heir jack to a removable handle or you can always replace it with one that is this way. So you have several choices here.