|
|
01-04-2016, 10:04 AM
|
#41
|
Senior Member
Join Date: Oct 2012
Location: Longview, WA, Washington
Trailer: 2013 Escape 15B - 2014 Nissan Frontier SL
Posts: 854
|
We did not have the hood installed. If you cook even a little, the steam and heat take their toll on the bottom of the cupboard. The seam tape separates and the vinyl facing of the plywood. If you don't get the hood, I would see if ETI can install a piece of heat resistant metal above the burners. I'm in the process of doing a retrofit.
__________________
Tim and Julie
2013 Escape 15B
2014 Nissan Frontier, Previous 2012 Santa Fe
|
|
|
01-04-2016, 11:06 AM
|
#42
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
I use a stove top coffee percolator and about the only thing cooked on the inside stove. I was worried about exactly what Tim n Julie pointed out above with the steam from the percolator so eliminating wasn't an option. It's not intrusive and I'm hoping the wireless refrigerator thermometer will stick on it with the magnet back it has.
|
|
|
01-04-2016, 11:08 AM
|
#43
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
It will stick on the "stock black model" but not the stainless upgrade.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
01-04-2016, 11:12 AM
|
#44
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
Quote:
Originally Posted by cpaharley2008
It will stick on the "stock black model" but not the stainless upgrade.
|
Darn...
|
|
|
01-04-2016, 12:30 PM
|
#45
|
Senior Member
Join Date: May 2013
Location: ..., New Mexico
Trailer: 2013 Esc19/'14 Silvrado
Posts: 4,193
|
One thing I like about having the hood is it gives me attaching flexibility for adding a shelf for cups, or hooks for utensils, and even my own extra special lighting. The hood creates attachment points without drilling into vinyl, or walls. The vent vents pretty good, too.
__________________
Myron
"A billion here, a billion there...add it all up and before you know it you're talking real money." Everett Dirkson
|
|
|
01-04-2016, 01:00 PM
|
#46
|
Senior Member
Join Date: May 2015
Location: Seatac, Washington
Trailer: "The Trailer", 2nd Gen 21' & a 2017 Tundra CrewMax in Blazing Blue Pearl
Posts: 2,888
|
Dometic CK2000 Cooker
This item was mentioned in another thread. I'm very intrigued by it. I've emailed the Dometic folks in the UK and asked if it would be available in the US, however I have yet to hear from their US folks (they said they'd forward my question to them).
Dometic CK 2000 | Dometic United Kingdom
Here's the Amazon UK link:
Dometic CK2000 Cooker Hood Extractor Fan with Carbon Filter & 2 Halogen Lights: Amazon.co.uk: Car & Motorbike
I measured and it will fit just fine under the cabinet on the 21'. I really like the fact that it doesn't stick out from the cabinet, which means one less thing for me to bang myself in to (if something is there that can be banged on, I'll find it eventually - I keep a good supply of bandaids around).
You don't get a credit from ETI for not installing a range hood or a light underneath (which is what they do if you don't get the range hood). (There is a $50 charge if you rotate the stove though.)
|
|
|
01-04-2016, 01:08 PM
|
#47
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,552
|
There is a new Dometic range hood that their support tells me will be out for approximately March 2016. This is a Dometic USA product, so should be available through their retailers. It seems like a nice product, and you would likely be able to swap it out with the one Escape installs.
CK 500 Range Hood - Dometic Corp
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
01-04-2016, 01:16 PM
|
#48
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
The United Kingdom model just recirculates, no outside venting, but the one Jim links appears to be a venting type, very nice upgrade.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
01-04-2016, 01:25 PM
|
#49
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,552
|
These two Dometic UK hoods fans will vent to the outside.
Cooker hoods | Product Categories | Dometic United Kingdom
Part of my likes the one where the fan is externally mounted on the roof. Sure there is a roof penetration, but that can be done properly, and it will be WAY quieter during operation. I don't like that it is a single speed fan, and uses halogen bulbs though.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
01-04-2016, 01:36 PM
|
#50
|
Senior Member
Join Date: Mar 2014
Location: Olathe, Kansas
Trailer: 2015 21ft Escape "Spirit of the Plains", 2014 GMC Sierra with max tow package
Posts: 1,100
|
Quote:
Originally Posted by escape artist
Hi: Richard in Georgia... Yes the range hood exhausts to the outside. You must release the tabs outside so the flap can open with the exhausted air flow. We do use it when cooking in our 5.0TA. Alf
escape artist N.S. of Lake Erie
|
Yes. I didn't discover that the range vent flap was held closed by the tabs until I was going over the trailer and getting it ready for storage. Most of the cooking was outside anyway. Also forgot to have someone hold down the flush for the toilet while blowing out the lines. Loren
|
|
|
01-04-2016, 02:41 PM
|
#51
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
Quote:
Originally Posted by cpaharley2008
It will stick on the "stock black model" but not the stainless upgrade.
|
Could try some magnetic tape with the peel-off backing to hold the thermometer in place, or double-stick a piece of sheet metal from a hardware store to the stainless hood.
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
01-04-2016, 02:48 PM
|
#52
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
I suppose that if one wants a range hood other than those available from Escape, the choice is whether to get the hood anyway so you have the outside vent installed by the Escape factory, or just get the light fixture so there is no hole in the shell... depending on whether the stock outside vent is what you will want later.
The roof-vented alternative makes sense to me, but does require a duct through the cabinet over the hood.
|
|
|
01-04-2016, 02:53 PM
|
#53
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by Greg A
... I'm hoping the wireless refrigerator thermometer will stick on it with the magnet back it has.
|
Quote:
Originally Posted by tractors1
Could try some magnetic tape with the peel-off backing to hold the thermometer in place, or double-stick a piece of sheet metal from a hardware store to the stainless hood.
|
Or forget the magnetic feature and attach it with 3M Command adhesive Picture Hanging Strips. It would have only one place to attach (where ever you put the strips on the hood), but it would be removable.
|
|
|
01-04-2016, 03:08 PM
|
#54
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
Quote:
Originally Posted by tractors1
Could try some magnetic tape with the peel-off backing to hold the thermometer in place, or double-stick a piece of sheet metal from a hardware store to the stainless hood.
|
Good ideas! I might try a 3M Command strip as Brian suggests. We'll see what option looks best when the thermometer arrives.
|
|
|
01-04-2016, 03:13 PM
|
#55
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
I think there are 3M Velcro products too.
You'll want it removable to change batteries.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
01-04-2016, 03:20 PM
|
#56
|
Senior Member
Join Date: Oct 2013
Location: Phoenix, Arizona
Trailer: 2015 Escape 19 "Seventy Degrees"
Posts: 3,495
|
Batteries?? Good call Glenn, hadn't thought about that one.
Not to hijack the original post, but I guess we're finding out that if you leave out a vent hood you can't stick the wireless fridge thermometer to it.
|
|
|
01-04-2016, 03:23 PM
|
#57
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Quote:
Originally Posted by Greg A
Batteries?? Good call Glenn, hadn't thought about that one.
Not to hijack the original post, but I guess we're finding out that if you leave out a vent hood you can't stick the wireless fridge thermometer to it.
|
There are plenty of other locations for the wireless to be located.....
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
01-04-2016, 03:32 PM
|
#58
|
Senior Member
Join Date: Oct 2008
Location: St. Thomas not BVI., Ontario
Trailer: 2014 Escape 5.0TA / 2016 Ram Eco Diesel 4X4
Posts: 8,038
|
Quote:
Originally Posted by Greg A
I use a stove top coffee percolator and about the only thing cooked on the inside stove. I was worried about exactly what Tim n Julie pointed out above with the steam from the percolator so eliminating wasn't an option. It's not intrusive and I'm hoping the wireless refrigerator thermometer will stick on it with the magnet back it has.
|
Hi: Greg A... My wife's fridge magnet collection will stick to the sink side& front only... not the dinette side. Hmmm. Alf
escape artist N.S. of Lake Erie
__________________
Quote Bugs Bunny..."Don't take life too seriously, none of us get out of it ALIVE"!!!
'16 Ram Eco D. 4X4 Laramie Longhorn CC & '14 Escape 5.0TA
St.Thomas (Not the Virgin Islands) Ontario
|
|
|
01-04-2016, 04:22 PM
|
#59
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Quote:
Originally Posted by gbaglo
I think there are 3M Velcro products too.
You'll want it removable to change batteries.
|
"Velcro" is a brand name. 3M's Picture Hanging strip is not that brand, and not the same design, but it is removable like Velcro, and much better suited to rigid surfaces (Velcro is for fabric flaps). This product - the one which I linked - is a removable system: you stick one strip on the object, another identical strip to the wall (or hood, or whatever), and the strips latch onto each other...
Quote:
Originally Posted by Brian B-P
Or forget the magnetic feature and attach it with 3M Command adhesive Picture Hanging Strips. It would have only one place to attach (where ever you put the strips on the hood), but it would be removable.
|
|
|
|
01-04-2016, 04:24 PM
|
#60
|
Senior Member
Join Date: Dec 2012
Location: Edmonton, Alberta
Trailer: 1979 Boler B1700
Posts: 14,935
|
Those who omit the hood - or go with the stainless version - and are feeling magnet-deprived can add a steel panel to the refrigerator door.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|