Table 5 TA - Escape Trailer Owners Community
Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×

Go Back   Escape Trailer Owners Community > Escape Me | General Topics > General Escape
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 11-19-2017, 05:37 PM   #1
Senior Member
 
Mark James's Avatar
 
Join Date: Oct 2015
Location: Victoria, British Columbia
Trailer: 2016/ 5TA Spirit Bear
Posts: 286
Table 5 TA

My wife ordered the Snap It table base from a company state side. After a few modifications this is what it looks like. No holes in the trailer and you can also remove it for use outside.
Attached Thumbnails
364E7D98-1525-449D-A77F-30A05FC8CAFCa.jpg   397BF490-F2BF-447E-82BF-ECCB695D885Ba.jpg   58B8FFE9-E587-447E-A656-909C8B2CEBC1a.jpg   5E1CC63E-85EA-43E1-B491-D6170D55EF10a.jpg  
__________________

Mark James is offline   Reply With Quote
Old 11-19-2017, 05:42 PM   #2
Senior Member
 
phalaney's Avatar
 
Join Date: Jul 2016
Location: St Louis, Missouri
Trailer: 2017 5.0TA
Posts: 251
Very nice
__________________

__________________
Peg and Bob
phalaney is offline   Reply With Quote
Old 11-19-2017, 09:36 PM   #3
Senior Member
 
Iowa Dave's Avatar
 
Join Date: Aug 2015
Location: Benton County, Iowa
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 6,393
We did the same on our 19 and made an additional table that was a little smaller than the one ETI supplied. We had no problems with the Snap Two. We purchased the T mounding for the table from ETI and changed out the color on the counter top and flip up table too. Thinking about doing one for the 21. You can match the counter top laminate from Home Depot etc
The Snap Two base came from Recreation Surplus in Elkhart IN. It’s Amish built.
Iowa Dave
__________________
Strike while the iron is hot. Live every day as if it were your last and one day you will be right.
Dave
Iowa Dave is offline   Reply With Quote
Old 11-20-2017, 08:41 AM   #4
Senior Member
 
Chotch's Avatar
 
Join Date: Feb 2016
Location: Naugatuck, Connecticut
Trailer: 2017 50 TA, 2016 F150, 2.7 Ecoboost
Posts: 1,045
How do you stow it for travel?
Chotch is offline   Reply With Quote
Old 11-20-2017, 08:52 AM   #5
Senior Member
 
Iowa Dave's Avatar
 
Join Date: Aug 2015
Location: Benton County, Iowa
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 6,393
Travel

Hi Mark
We traveled with out table folded down and resting on the rails used for the bed setup. I cut a couple little 3/4 by 3/4 by about 6 inch long stops with an angle on one end and a couple Velcro Dots on the bottom. That kept the table in place from sliding forward. Towing is the rolling earthquake Donna describes especially as you roll down the busted up Interstates especially in Minnesota. I donít travel I90 to get to South Dakota anymore. I take US 20 across northern Iowa and go north on I29 at Souix City.
Iowa Dave

Dave
__________________
Strike while the iron is hot. Live every day as if it were your last and one day you will be right.
Dave
Iowa Dave is offline   Reply With Quote
Old 11-20-2017, 11:26 AM   #6
Senior Member
 
h2owmn's Avatar
 
Join Date: Nov 2017
Location: Placerville, California
Trailer: 2018 Escape 17A double dinette
Posts: 1,341
This is just what I'm looking for in the front of the 17A which will have a dinette instead of the permanent bed. I don't want anything protruding from the floor, and most of the time, it'll be a 30 inch wide bed with a little bit of seating on each end.
__________________
--Time and trouble will tame an advanced young woman, but an advanced older woman is uncontrollable by any earthly force. --Dorothy Sayers
h2owmn is offline   Reply With Quote
Old 11-20-2017, 11:57 AM   #7
Senior Member
 
Iowa Dave's Avatar
 
Join Date: Aug 2015
Location: Benton County, Iowa
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 6,393
Snap 2

If you get a snap 2 base, there are levelers on each crossbar. Thereís a stop nut on the bottom outside of the tube but the nut will work loose. So I took the endcaps out and put another nut on the leveler stem and once level, tightened them down. No more loosening up
and always level. Pretty stealthy huh?
Iowa Dave
__________________

__________________
Strike while the iron is hot. Live every day as if it were your last and one day you will be right.
Dave
Iowa Dave is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Escape Trailer Industries or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 04:07 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright 2012 Social Knowledge, LLC All Rights Reserved.
×