Quote:
Originally Posted by cpaharley2008
Yes, I believe in the picture you can unscrew the front off the socket and remove from the faceplate and install another socket in the faceplate. I have taken them apart, it is comprised of 3 pieces, the faceplate, a holding ring and the socket itself.
|
Yes, I just took one apart myself. I see where you are going. The trouble is the existing socket is narrow and the opening diameter in the faceplate is only about 7/8”. The double USB socket replacement you showed earlier (post #12) needs a cutout size of 1.0625” based on online specs. Others as John mentioned need 1.125”. They will not fit the hole.
Threaded Mode
