stereo antenna

[John in Santa Cruz]

Originally Posted by NEWYORKHILLBILLY

I thinking the shakespear mount could also be installed with VHB tape. In the down position would not be much wind and there pretty light

you need to drill a hole for the cable, so why not a few more smaller holes for the mounting hardware? paint both sides of the rubber gasket with sikaflex or similar before assembling

[NEWYORKHILLBILLY]

Originally Posted by John in Santa Cruz

you need to drill a hole for the cable, so why not a few more smaller holes for the mounting hardware? paint both sides of the rubber gasket with sikaflex or similar before assembling

I was thinking of running the wire out fridge vent cap. I still have to investigate this farther. My other thought was the mount sticks out from trailer a little farther than I like.If ti was to catch it on a tree or something. Maybe the tape seal would break preventing damage to the trailer. I just trying to Research all my options.

[Vermilye]

Originally Posted by Mike Lewis

Thanks for the photos, Jon; I wondered what your setup looked like. Does the ratcheting mount have an interior plate that it attaches to?


I read that the ratcheting mount will also take Shakespeare's 8-foot AM/FM antenna. Hmm...

No interior plate - I used fender washers under the stainless steel bolts & nuts.