3 burner oven - mystery loose part.

[alanmalk]

I am looking for a kind person with a 3 burner Atwood stove with oven, approximate vintage 2014-2016, to look inside and confirm I put my temperature sensor back in the correct position.

It started with my wife finding a loose part that looks like a clip designed to hold a thin rod. Nowhere in the manual could I locate a clip, however, in the trouble-shooting section it mentions that the temperature sensor "bulb" should be clipped in such a manner that it doesn't touch metal.

The photos show the location against the back wall of the oven. The clip in question is at the tip of the red arrow. I would love to know if I made the correct guess and got everything back into the correct position. If not, could you take a photo of the general area?


Thanks!!!

[skiman]

Originally Posted by alanmalk

I am looking for a kind person with a 3 burner Atwood stove with oven, approximate vintage 2014-2016, to look inside and confirm I put my temperature sensor back in the correct position.

It started with my wife finding a loose part that looks like a clip designed to hold a thin rod. Nowhere in the manual could I locate a clip, however, in the trouble-shooting section it mentions that the temperature sensor "bulb" should be clipped in such a manner that it doesn't touch metal.

The photos show the location against the back wall of the oven. The clip in question is at the tip of the red arrow. I would love to know if I made the correct guess and got everything back into the correct position. If not, could you take a photo of the general area?


Thanks!!!

Snap one later today!

[skiman]

Here it is! You guessed pretty well.

[skiman]

You might want to check your burner areas for loose items such as screws etc. The Alcan shook our oven door and several screws holding burner stuff loose. If you lost the probe you might have some other items floating around.

[alanmalk]

Originally Posted by skiman

You might want to check your burner areas for loose items such as screws etc. The Alcan shook our oven door and several screws holding burner stuff loose. If you lost the probe you might have some other items floating around.

Oh-Yes. On my first washboard road we lost some burner hold-down screws. They never surfaced and I had to order some from Atwood.

Many thanks for the photo. My faith in blind guessing has been restored.