|
|
02-26-2017, 08:25 PM
|
#181
|
Senior Member
Join Date: Feb 2016
Location: Seattle, Washington
Trailer: 17b - 2017 model
Posts: 334
|
Quote:
Originally Posted by Tom W
We also use a Caframo Air Dryer to keep humidity down during storage. It uses less than 100 watts.
|
That sounds like a great solution if it's enough in your climate. The nice thing is that it eliminates the need to deal with the condensate, although if you drill a hole into the collection bin of one of the Eva-Dry or similar dehumidifiers and drain via a hose to the gray water tank it should be almost as easy. It should take quite a while to fill the gray tank. A 75 watt dehumidifier is going to heat the space by 75 watts and as a bonus you get the dehumidification, so it's doubly effective, but perhaps 100 watts is good enough for many/most people? Only real world experience would tell.
Another option I thought of was just using a 100 watt electric blanket during storage. I like dual use solutions. I think the fan on that unit isn't critical provided the blanket doesn't heat to a point where it combusts or breaks down.
|
|
|
02-26-2017, 08:33 PM
|
#182
|
Senior Member
Join Date: Feb 2016
Location: Seattle, Washington
Trailer: 17b - 2017 model
Posts: 334
|
Quote:
Originally Posted by War Eagle
Forgive me if someone has already addressed this in the 174 previous posts and I missed it, but with ETI putting a coil-spring base mattress in their 2017 models (at least in our new 21'), how important is adding breathing room under the mattress (like the Ikea slats)? It seems that air should be able to move fairly freely in and around the mattress's coil spring base to minimize moisture build-up under there. Insight or thoughts?
|
I don't know what this coil mattress it looks like, but that seems like a good bet providing air can vent out the sides of the mattress.
I remember seeing a thread about this and the conclusion was that the spring mattress solved the condensation issues.
|
|
|
02-26-2017, 08:36 PM
|
#183
|
Senior Member
Join Date: May 2016
Location: Alameda, California
Trailer: 2010 Escape 15A
Posts: 105
|
Hypervent has worked great for me in both my U-haul and now my Escape. Never had an issue with condensation throughout every season.
|
|
|
02-26-2017, 09:08 PM
|
#184
|
Senior Member
Join Date: Dec 2013
Location: Westcliffe, Colorado
Trailer: 2010 EggCamper (#083); 2017 Escape 21 (#053); 2016 F-150 5.0L FX4
Posts: 1,765
|
Quote:
Originally Posted by Ron in BC
I'm not sure what you mean by "base". We have a mattress with coil springs that sits on a plywood platform. The mattress is asymmetrical and the bottom is covered with a vinyl material. I don't think that there would be a reduction in moisture because of the coil springs because the bottom covering doesn't give the impression of being permeable.
Ron
|
I haven't tried to measure it (yet), but it seems like the mattress in our 2017 21' is approximately 3" of memory foam over 6" inner-coil springs. Both the bottom and sides feel and look like cotton material, not vinyl. The material on the sides is thin enough you can feel the springs inside, and it appears that air, and moisture with it, could move pretty freely through just the side panels alone. I guess we'll find out when our typically humid summer weather rolls in in a few months. Anyone else with a 2017 21' know what I'm trying to describe and have any thoughts on air/moisture movement out through the inner-coil springs and side panels of the mattress?
|
|
|
02-27-2017, 12:41 AM
|
#185
|
Member
Join Date: Aug 2015
Location: portland, Oregon
Trailer: 2011 19' Escape
Posts: 46
|
Quote:
Originally Posted by Kountrykamper
Yes, 2 rolls. One for the bed and one for the dinette cushions. I will use some of what is left over from the dinette to do the sides of the bed.
We have a friend who has a new 19' and spent a month in it. They we having some condensation issues and said that the wood under the dinette seats was even a little damp so that's why I figured to just do it all while I was at it. I just hope the cushions don't slide around on it. I will install it Saturday and let you know how I like it.
|
After our two months in the southwest this (unusually wet) winter we found some mold on the wood under a dinette cushion in our '19. Time to invest in some drymesh!
Amy
|
|
|
04-02-2017, 04:43 PM
|
#187
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
That is more waterproof than the mesh but it may make the bed warmer in the winter. One roll is enough for 2 beds, so sharing is possible.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
04-02-2017, 04:51 PM
|
#188
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
Quote:
Originally Posted by cpaharley2008
That is more waterproof than the mesh but it may make the bed warmer in the winter. One roll is enough for 2 beds, so sharing is possible.
|
I thought the same; I've written to the manufacturer and asked for a large sample piece to examine/test. Might consider selling split rolls on my website.
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
04-02-2017, 05:28 PM
|
#189
|
Senior Member
Join Date: Oct 2008
Location: North Vancouver, British Columbia
Trailer: 2009 Escape 17B 2020 Toyota Highlander XLE
Posts: 17,136
|
I don't get the concept. Isn't the mattress ( or cushion ) already full of holes, being foam.
__________________
What happens to the hole when the cheese is gone?
- Bertolt Brecht
|
|
|
04-02-2017, 06:42 PM
|
#190
|
Senior Member
Join Date: Oct 2008
Location: Calgary, Alberta
Trailer: 2017 Escape 5.0 TA
Posts: 15,554
|
Quote:
Originally Posted by tractors1
|
We use a product like that called Delta-FL a lot in basements that can have moisture wicking through the concrete. It provides ventilation while providing a path for moisture to dissipate. We anchor T&G ply on top of it, then lay any flooring we wish. Works great for using solid hardwood in a basement.
DELTA FL
It's sister product Delta-MS is used on the exterior of foundations to give any ground water that may come in contact with the foundation a direct path to the footing, as well as allow venting, keeping the foundation walls dry.
DELTA MS
I could see these products working the same as the others mentioned here. Place with the dimples away from the mattress.
__________________
2017 Escape 5.0 TA
2015 Ford F150 Lariat 3.5L EcoBoost
2009 Escape 19 (previous)
“Most folks are about as happy as they make up their minds to be.” — Abraham Lincoln
|
|
|
04-02-2017, 07:11 PM
|
#191
|
Commercial Member
Join Date: Apr 2014
Location: Hillsboro, Oregon
Trailer: 2014 Escape 21 - "Felicity"
Posts: 2,945
|
Quote:
Originally Posted by gbaglo
I don't get the concept. Isn't the mattress ( or cushion ) already full of holes, being foam.
|
Not mine - I had a custom innerspring mattress built by the ETI supplier as the stock foam mattress was too soft for us. Foam mattresses don't have an air circulation path or boaters wouldn't spend $$ on Hypervent.
__________________
Charlie Y
Need custom storage to your design? Don't drill holes!
www.RVWidgetWorks.com
|
|
|
04-02-2017, 07:54 PM
|
#192
|
Site Team
Join Date: Nov 2008
Location: Portland, Oregon
Trailer: 2014 Escape 5.0 TA
Posts: 11,053
|
I sleep on a twin mattress in Ten Forward. I don't need or want a queen mattress. I bought a firm twin mattress at Ikea. Something I was told to pay attention... the mattress needs to breathe or mold will occur. Putting any mattress on top of plywood with no ventilation... guess what will happen?
__________________
Donna D.
Ten Forward
2014 Escape 5.0TA
|
|
|
04-02-2017, 08:05 PM
|
#193
|
Senior Member
Join Date: Sep 2016
Location: Bremerton, Washington
Trailer: 2019 5.0 TA
Posts: 1,141
|
Here is another option. Both RoninBc and I have done this. Not only does it provide ventilation but improves the comfort of the mattress by quite a bit.
http://www.escapeforum.org/forums/f8...19-a-9267.html
__________________
- Arnie & Paula & Kizzy the rat terrier
https://www.arniesea.com
- 2019 5.0 TA, 2017 Tundra Platinum.
- Bremerton, WA
|
|
|
04-03-2017, 07:04 PM
|
#194
|
Senior Member
Join Date: Dec 2008
Location: ,, Oklahoma
Trailer: 17
Posts: 840
|
fisheries supply in Seattle has hypervent as mentioned here. It was 11.40 usd per foot. I could not find it at west marine in Tacoma(fife, wa). I don't think any west marine carries it according to an employee searching for me there.
|
|
|
04-03-2017, 07:18 PM
|
#195
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
I'm thinking of the Home Depot stuff and splitting the cost with another forum member. Anyone going to Osoyoos who wants to go in halfsies on one of the rolls, I'll buy and deliver to Osoyoos a half roll- 50 sq feet- $36, enough to do your bed and some....
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
12-03-2017, 10:03 PM
|
#196
|
Junior Member
Join Date: Dec 2017
Location: nanaimo, California
Trailer: 2017 sportrek vrb271
Posts: 1
|
Quote:
Originally Posted by cpaharley2008
I'm thinking of the Home Depot stuff and splitting the cost with another forum member. Anyone going to Osoyoos who wants to go in halfsies on one of the rolls, I'll buy and deliver to Osoyoos a half roll- 50 sq feet- $36, enough to do your bed and some....
|
How did this stuff work out? I'm looking into what I should purchase this week
Sent from my SM-G955W using Tapatalk
|
|
|
12-04-2017, 01:18 AM
|
#197
|
Senior Member
Join Date: Aug 2015
Location: Ponoka, Alberta
Trailer: 2016 19 classic "outta sight", jeep rubicon unlimited
Posts: 1,645
|
Quote:
Originally Posted by cpaharley2008
I'm thinking of the Home Depot stuff and splitting the cost with another forum member. Anyone going to Osoyoos who wants to go in halfsies on one of the rolls, I'll buy and deliver to Osoyoos a half roll- 50 sq feet- $36, enough to do your bed and some....
|
Of you were talking "Drymesh" I am in!!! But not this stuff. I have my questions about it. In my opinion it, yes, creates open space under mattress. But on the other hand it creates sealed space, that kind of sucks to the mattress. Not allowing air movement.
Drymesh is proven to eliminate all problems.
Sooooooo: I am in for splitting on Drymesh.
__________________
"never lose hope, never lose faith"
|
|
|
12-04-2017, 04:14 AM
|
#198
|
Senior Member
Join Date: Jun 2010
Location: Central, Pennsylvania
Trailer: Escape#5 2022 E19
Posts: 26,268
|
Never did materialize, since no one else seemed interested, I passed. I installed some reflective parcels under my bed, seems to work .Also Escape's mattress is a little smaller allowing air to circulate around the perimeter.
__________________
Jim
Sometime life gets in the way of living.......
|
|
|
12-04-2017, 04:45 AM
|
#199
|
Senior Member
Join Date: Jul 2012
Location: Burlington, Vermont
Trailer: 2014 17b/ 2012 Chevy Colorado
Posts: 736
|
We spent big bucks to buy the stuff when we bought our 17B. Haven't used it since and haven't had any moisture problems under the pads. We haven't been to any real humid environments however. The only thing we do do is put all the cushions up on edge when the trailer isn't being used.
|
|
|
01-21-2018, 02:09 PM
|
#200
|
Senior Member
Join Date: Oct 2017
Location: Kelowna, British Columbia
Trailer: 2018 Escape 19
Posts: 2,720
|
Quote:
Originally Posted by dglasrud
A follow up to ordering drymesh online for Canadian customers. Our 87.45 U.S. purchase which we thought would be sent USPS, was sent by courier and cost an extra 41.00 for brokerage fees and taxes.
|
For under the bed am thinking of using this “Easy Tile” from Princes Auto which is coming on sale next week at $10 for 10 - 1 sq ft tiles. $40 will get me 40 - 1 sq ft tiles...some of which I will cut in half and run around the edge. I am also wondering if this product would be good for the bathroom floor or harder on the floor that I am trying to protect.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|