|
04-07-2023, 05:19 PM
|
#1
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Bidet wand for bathroom faucet
Has anyone hooked up a bidet hose/wand to their faucet? Or in some other way? Any brand recommendations?
I'm guessing I might find one that will screw onto the faucet in place of the aerator. Or maybe rig something in tandem with the shower hose. I haven't looked to see if there's a way to tap into the toilet's water line. Wondering what others may have done, and what size connector I might need to look for. TIA.
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
04-07-2023, 05:38 PM
|
#2
|
Senior Member
Join Date: Feb 2009
Location: Madison area, Wisconsin
Trailer: 2016 Escape 19 Chevy 2012 Express 3500 Van
Posts: 1,773
|
Saw these
I do not have either of these units, but I have read of them.
I've thought of adding something to my rig, but haven't, yet. I do have a bidet at home. A useful appliance during the Covid T.P. shortage/hoarding event.
https://kk.org/cooltools/portable-travel-bidet/
https://kk.org/cooltools/non-electri...at-attachment/
I'm "flush" with suggestions.
|
|
|
04-07-2023, 06:24 PM
|
#3
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Quote:
Originally Posted by HABBERDABBER
|
And they weren't crappy suggestions, either! I have one on my home toilet also, but I never had any idea there were portable ones. I'll give that some thought.
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
04-07-2023, 09:32 PM
|
#4
|
Senior Member
Join Date: Sep 2019
Location: Greenwood, Indiana
Trailer: 2020 Escape 5.0TA
Posts: 367
|
My sister has the portable one and is happy with it. And she can take it into public potties in case there is no TP.
__________________
Sharon.
|
|
|
04-08-2023, 11:18 PM
|
#5
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Not much feedback on this subject; I guess there aren't many bidet users on this forum. After some searching on Amazon, I found and decided to order a unit that attaches to the aerator threads and comes with several different-size adapters. I think the female 13/16" is the size I need.
I also picked up an Oxygenics shower head today at WM and installed it. That was surprisingly easy to do! Took all of 4 minutes and no tools.
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
04-09-2023, 03:27 PM
|
#6
|
Senior Member
Join Date: Jul 2016
Location: Whidbey Island, Washington
Trailer: 2020 Escape 17B "Voyager"
Posts: 2,700
|
I liked the looks of the one that installed under the toilet seat but I don't know that it would fit- if anyone tries it I'd love to know. I think the seat is awfully small for a handheld one.
|
|
|
04-09-2023, 10:30 PM
|
#7
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Quote:
Originally Posted by Bobbie54
I liked the looks of the one that installed under the toilet seat but I don't know that it would fit- if anyone tries it I'd love to know. I think the seat is awfully small for a handheld one.
|
I think the seat is awfully small, period! And I'm a relatively small guy. Yeah, it will be interesting to see how this works out.
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
04-29-2023, 09:06 PM
|
#8
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Quote:
Originally Posted by Mike G
Not much feedback on this subject; I guess there aren't many bidet users on this forum. After some searching on Amazon, I found and decided to order a unit that attaches to the aerator threads and comes with several different-size adapters.
|
The head on that unit looked promising, but in the end (pun intended) it produced a huge volume of water with very little pressure. Looking at photos of similar units, they all appear to have similar spray patterns.... except one: the Brondell Clean Spa. Installed, tested, plenty of pressure. The hose was a bit short, though, so I retained the hose from the previous purchase (it is super-flexible, unlike the stiff plastic OEM hose from Escape).
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
08-18-2023, 01:27 PM
|
#9
|
Senior Member
Join Date: Sep 2019
Location: Greenwood, Indiana
Trailer: 2020 Escape 5.0TA
Posts: 367
|
My sister uses on of the hand-held ones and likes it. She also takes it into public restrooms so she doesn’t have to worry if the TP holder is empty.
__________________
Sharon.
|
|
|
09-10-2023, 04:24 PM
|
#10
|
Senior Member
Join Date: Mar 2021
Location: Ashland, Illinois
Trailer: Escape 5.0
Posts: 138
|
Never used a bidet. But the redneck solution would be the handheld shower head.
|
|
|
09-10-2023, 04:46 PM
|
#11
|
Senior Member
Join Date: Aug 2015
Location: Benton County, Iowa
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 8,284
|
In 1960 they built 3 new swimming pools in Cedar Rapids Iowa. The biggest pool had very large changing areas and one of the features was the inclusion of 6, count ‘em, 6 Ladies Urinals. Never saw them before or since but I can tell you they were rarely used and we removed them in the mid eighties when we renovated that pool. Probably could have sold them to the Potty Hall of fame. But alas they went to the landfill.
Iowa Dave
__________________
Ain’t no trouble jacking a double Burma Shave
Dave
|
|
|
09-10-2023, 08:04 PM
|
#12
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Quote:
Originally Posted by GregWCIL
Never used a bidet. But the redneck solution would be the handheld shower head.
|
I tried that. The spray is so broad it gets everything back there soaking wet, but doesn't do any good where it counts. The spray is broad but not vigorous enough to do anything worthwhile.
The unit I bought is working fine, though. And I've taken showers with it, too.
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
09-10-2023, 08:06 PM
|
#13
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Quote:
Originally Posted by Iowa Dave
In 1960 they built 3 new swimming pools in Cedar Rapids Iowa. The biggest pool had very large changing areas and one of the features was the inclusion of 6, count ‘em, 6 Ladies Urinals. Never saw them before or since but I can tell you they were rarely used and we removed them in the mid eighties when we renovated that pool. Probably could have sold them to the Potty Hall of fame. But alas they went to the landfill.
Iowa Dave
|
Difficult to imagine what those urinals looked like. If you come across a photo online of a similar one, please post it!
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
09-10-2023, 08:28 PM
|
#14
|
Senior Member
Join Date: Mar 2021
Location: Ashland, Illinois
Trailer: Escape 5.0
Posts: 138
|
Quote:
Originally Posted by Mike G
I tried that. The spray is so broad it gets everything back there soaking wet, but doesn't do any good where it counts. The spray is broad but not vigorous enough to do anything worthwhile.
The unit I bought is working fine, though. And I've taken showers with it, too.
|
I’m not taking a shower/ with it after that,
|
|
|
09-11-2023, 12:53 PM
|
#15
|
Senior Member
Join Date: Mar 2018
Location: Tulsa, Oklahoma
Trailer: 2012 E19
Posts: 1,773
|
Quote:
Originally Posted by GregWCIL
I’m not taking a shower/ with it after that,
|
Well, I understand the psychological factor. It really doesn't get dirty, though, because it's held more to the back where it's spraying more horizontally than vertically. No good reason to hold it directly beneath. (I hope that isn't "too much information.") And even if it did become soiled, the sink is right there for appliance cleanup at the same time as one's hands.
Hey, it's loads better than what they use in some parts of the world. Like a wooden stick... or one's own left hand...
__________________
Losing weight puts one at much greater risk of becoming thin.
|
|
|
09-11-2023, 01:22 PM
|
#16
|
Senior Member
Join Date: Aug 2015
Location: Benton County, Iowa
Trailer: 2013 Escape 21 Classic Number 6, pulled by 2018 Toyota Highlander
Posts: 8,284
|
Here’s what ours looked like
Quote:
Originally Posted by Mike G
Difficult to imagine what those urinals looked like. If you come across a photo online of a similar one, please post it!
|
https://www.google.com/imgres?imgurl...%2Fim%2Fm4%2F3
Iowa Dave
__________________
Ain’t no trouble jacking a double Burma Shave
Dave
|
|
|
09-11-2023, 03:02 PM
|
#17
|
Junior Member
Join Date: Sep 2021
Location: Ferndale, Washington
Trailer: 2016 E17B
Posts: 10
|
Quote:
Originally Posted by Mike G
Wondering what others may have done
|
I have a bidet wand installed in my E17B.
I tapped into the waterline that leads to the bathroom from under the dinette seat with a “T” using expansion PEX. From there, I went through the wall into the bathroom. Once inside the bathroom I brought the waterline up to a convenient operating height as shown in the photo, and put a 1/4 turn shutoff valve leading to adapters that the bidet hose would fit on.
I use 3M “command” adhesive strips to hold pieces of HDPE that I attach things like plumbing fittings or the holder for the bidet wand itself to the bathroom walls so If necessary I can remove everything without leaving a trace.
A bidet like this can also be used to clean the toilet or even supply all the water necessary to flush it.
I have another 1/4 turn tap inside the bathroom on the other side of the toilet that can turn off water to the toilet. I sometimes flush the toilet by turning the water to the toilet off, turning the supply water to the bidet on, then I spray off the walls of the toilet with the bidet and flush with the toilet flush handle. That way the contents of the toilet are dumped but no new water is introduced. I can spray clean the toilet bowl, then flush, then if necessary spray a bit more until everything is clean with a minimum very controlled amount of water.
This bidet wand has its own shutoff that controls the water flow from zero to a pretty high pressure spray.
The manufacturer states that the supply to the bidet should be shut off between uses. I turn off the bidet using its own valve then turn off the supply to it using the 1/4 turn valve. Then I open the bidet valve to relieve the pressure in its hose, then turn OFF the bidet valve. I make sure to leave the bidet with its own valve in the OFF position. If the bidet is left with its supply of water OFF but the bidet valve ON, the next time you turn it on you can be surprised. I always turn the bidet supply on with the potential spray of water from it pointed away from me into the sink.
You can end up with a bit of water on the toilet seat that needs to be wiped off after use, or even water on the floor if you are still learning its capabilities, due to the cramped space in an E17B bathroom.
I have toilet mounted bidets at home but I like this one so much I added it to my bathroom at home in addition to the bidet that is already there.
This is the link to it on Amazon
Here is a link to a post on FiberglassRV showing how I installed a different bidet into my 16 foot Scamp.
|
|
|
09-11-2023, 03:39 PM
|
#18
|
Junior Member
Join Date: Sep 2021
Location: Ferndale, Washington
Trailer: 2016 E17B
Posts: 10
|
I can't remember the exact fitting I used, but
I think the bidet hose required a 1/2 inch "G" fitting. "G", a.k.a. BSPP (British Straight Parallel Pipe), is like pipe thread only the thread isn't tapered. Flexible hose for bathroom hand held showers and bidets always seems to be troublesome to fit.
In this case, to get from the particular 1/4 turn tap I used, to the bidet hose, I started with a 3/8 inch compression at the valve that attached a 3/8 copper pipe. I put 3/8 compression on the other end of the copper pipe to attach to an adapter that receives 3/8 inch compression on one end and goes to a half inch male "G" on the other. The female "G" on the hose fits that. Its sort of an eyesore that I wouldn't duplicate unless I couldn't get something else.
I may have used a different, more flexible hose for this bidet than the one it came with because I am very particular about hoses, but I don't remember. Duh.
|
|
|
09-11-2023, 04:44 PM
|
#19
|
Site Team
Join Date: Jul 2022
Location: Idaho Falls, Idaho
Trailer: 2023 Escape 5.0TA
Posts: 886
|
Quote:
Originally Posted by Iowa Dave
In 1960 they built 3 new swimming pools in Cedar Rapids Iowa. The biggest pool had very large changing areas and one of the features was the inclusion of 6, count ‘em, 6 Ladies Urinals. Never saw them before or since but I can tell you they were rarely used and we removed them in the mid eighties when we renovated that pool. Probably could have sold them to the Potty Hall of fame. But alas they went to the landfill.
Iowa Dave
|
If those had been in Texas they would have filed them with ice.
|
|
|
09-24-2023, 02:46 PM
|
#20
|
Senior Member
Join Date: Jan 2019
Location: Johnson City, Texas
Trailer: 2019 19 ft.
Posts: 499
|
Bidet on SmartWater bottle
Quote:
Originally Posted by Mike G
what others may have done, and what size connector I might need to look for. TIA.
|
We use this product instead of one connected to the plumbing system.
https://www.garagegrowngear.com/coll...-pika-outdoors
73/gus
__________________
Mary & Gus
K5MCL & KR4K
2019 E19' (F1), Mercedes Sprinter 2500 or GLS580
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|